注: 建议图片大小150px*50px 
Tel:
+86-519-82899588
 |
Item | Parameter | |
Material | Thickness | 1.0－3.0mm |
Diameter of shaft | 76 mm | |
Inner-diameter | 470-520mm | |
Capacity | 5 tons passive de-coiler | |
Max.Out diameter | 1500mm | |
Material of shaft | GCr 45 steel | |
Forming stand | Station | 20 stations |
Shaft Material | 45# steel 76mm diameter; | |
Frame body | H-BEAM frame 450 mm | |
Roller materail | GCr15 , hard chromed , HRC 58-62 | |
Main motor | 15kw | |
Forming speed | 15-18m/min(not include cutting) | |
Voltage | 380v,50hz,3ph | |
Transport | Chains drive | |
Size approx | 10.0m*1.4m*1.5m | |
Overall packing shipment | 1* 40ft | |
Working hours | per day 8 to 16 hours | |
Set up time | 30 min | |
Line direction | Left to right while facing operator panel | |
Cages | Use the strong steel nets sliding on the full machine length | |
Hydraulic Cutting system | Material | Blade and mold material: Cr12mov steel with quenched treated 60-62℃ |
Cutting power | 5.5kw | |
Output table | Specification(W*H) | 3000mm*1500mm |
Construction | Welded steel frame with chromed rollers | |
Others | Screen | 5.7 inch Siemens Touch Screen |
PLC and frequency conversion | Siemens PLC,Yasakaw Frequency Changer | |
Other electronic components | Schneider | |
Encoder | Omron | |
Use | 1)Automatic length and quantity measurement 2)Control station is used to control product length and quantity, automatically cutting to length and stop when required quantity is achieved. 3)Error is easy to adjusted. | |
Language | English and Chinese | |
Product | Length | Based on requirements |
Accuracy level | Profile dimension +/- 0.5 mm Cut length: +/-1.5mm Angular dimension: +/- 1 degree Bend/twist/warp: 0.5 mm/mrt End flair (an cut end): +/-0.5 m.m | |
 HIGH DUTY STRUCTURE The sturcture we use for this machine has the higher duty mechanical behavior; CZ interchangeable roll forming machine structure with the easy exchange system; |
 ROLLERS The rollers processing by twice CNC machining and quenched, HRC 58-62; CZ purlin roll forming machine roller material is GCr15; Shaft diameter is 80mm; |
 AUTOMATIC ADJUST Design as flexiable width change from 80-300mm as standard; This steel section roll forming machine can do max size at 120*350mm; |
 UNIVERSAL CUTTING Cutting size flexiable; Cr12, MOV cutting material; Resharp every 20000-30000 times cutting as maintaince |
 FAMOUS BRAND PLC 1. PLC controller -- Siemens 2. Transducer -- Yaskawa 3. Encoder -- KOYO 4. Other electronic component- Schneider |
Item | Parameter | |
Material | Thickness | 1.0－3.0mm |
Diameter of shaft | 76 mm | |
Inner-diameter | 470-520mm | |
Capacity | 5 tons passive de-coiler | |
Max.Out diameter | 1500mm | |
Material of shaft | GCr 45 steel | |
Forming stand | Station | 20 stations |
Shaft Material | 45# steel 76mm diameter; | |
Frame body | H-BEAM frame 450 mm | |
Roller materail | GCr15 , hard chromed , HRC 58-62 | |
Main motor | 15kw | |
Forming speed | 15-18m/min(not include cutting) | |
Voltage | 380v,50hz,3ph | |
Transport | Chains drive | |
Size approx | 10.0m*1.4m*1.5m | |
Overall packing shipment | 1* 40ft | |
Working hours | per day 8 to 16 hours | |
Set up time | 30 min | |
Line direction | Left to right while facing operator panel | |
Cages | Use the strong steel nets sliding on the full machine length | |
Hydraulic Cutting system | Material | Blade and mold material: Cr12mov steel with quenched treated 60-62℃ |
Cutting power | 5.5kw | |
Output table | Specification(W*H) | 3000mm*1500mm |
Construction | Welded steel frame with chromed rollers | |
Others | Screen | 5.7 inch Siemens Touch Screen |
PLC and frequency conversion | Siemens PLC,Yasakaw Frequency Changer | |
Other electronic components | Schneider | |
Encoder | Omron | |
Use | 1)Automatic length and quantity measurement 2)Control station is used to control product length and quantity, automatically cutting to length and stop when required quantity is achieved. 3)Error is easy to adjusted. | |
Language | English and Chinese | |
Product | Length | Based on requirements |
Accuracy level | Profile dimension +/- 0.5 mm Cut length: +/-1.5mm Angular dimension: +/- 1 degree Bend/twist/warp: 0.5 mm/mrt End flair (an cut end): +/-0.5 m.m | |
| HIGH DUTY STRUCTURE The sturcture we use for this machine has the higher duty mechanical behavior; CZ interchangeable roll forming machine structure with the easy exchange system; |
ROLLERS The rollers processing by twice CNC machining and quenched, HRC 58-62; CZ purlin roll forming machine roller material is GCr15; Shaft diameter is 80mm; |
| AUTOMATIC ADJUST Design as flexiable width change from 80-300mm as standard; This steel section roll forming machine can do max size at 120*350mm; |
UNIVERSAL CUTTING Cutting size flexiable; Cr12, MOV cutting material; Resharp every 20000-30000 times cutting as maintaince |
| FAMOUS BRAND PLC 1. PLC controller -- Siemens 2. Transducer -- Yaskawa 3. Encoder -- KOYO 4. Other electronic component- Schneider |
