2023-06-05

ItemParameterMaterialThickness0.5－1.5mm10tons decoiler 　Material of shaftGCr 45 steel　Diameter of shaft130mm　Inner-diameter480-630mm　Speed 0-19m/min　Main motor power7.5 kw　Hydraulic motor5.5 kw　Capacity10 tons de-coiler with coil cart　Max.Out diameter1300mm　Material of shaftGCr 45 steel　Diameter of

2023-05-29

Roll Forming Machine For Elevator Frames With High Precision

2022-05-20

This production line is composed of a molding machine. The production line is composed of rack, feed, forming host and hydraulic shear, discharge and other machines.

2022-05-18

CU Shape Omega Top Hat Roll Forming Machine Exported to South Americ - YTSINGCU Shape Omega Top Hat Roll Forming Machine Exported to South Americ - YTSING This roll former production line is composed of decoiler, feeding applicator, roll forming part and hydraulice cutter and output table.

2022-05-07

American customer Arch.A came to our factory for testing metal deck roll forming machine on March 28th in 2019, he was very satisfied with the quality of metal deck machine after tested 1 ton raw material, perfect machine performance let customer very happy,then he placed another roofing machine ord

2021-09-08

The shutter slat roll forming machine introduced by our company has the advantages of quick operation, quick forming efficiency and quick cutting speed .Our company has organized a strong after-sales service team, which can solve the production problem caused by technology, equipment and other facto

2021-05-26

This machine is export to the South America

2021-04-25

Z-beam is a common cold-formed thin-walled steel with a thickness of 1.6-3.0mm and a section height of 120-350mm.The processing material is hot rolled (painted), galvanized.The processing standard is according to GB50018-2002.Z-beam is usually used in large steel structure buildings.The processing l

2020-12-08

Most rollers contain between 40 and 500 rollers and positioning sleeves.Each roll and positioning sleeve shall be installed in the correct order and direction to the correct track, specified upper and lower shafts.The cold-forming industry has developed a simple marking system that uses a complete s

2020-11-17

This machine is exported to Mexica.No after-sale issue after buyer is operating for a long time.Customer is very satisfied with its good quality and strong working performance.Welcome your inquiry.

2020-10-29

Available roll forming unit working stations The roll designer must check whether the number of mill passes can meet the number of passes estimated by the forming section.If not, either modify the design to increase the side roller or increase the number of passes.If the above method is not feasible

2020-08-28

Shelves or Racks or Beams are an important tool for modern warehouses to improve efficiency. With the rapid development of economy, foreign-funded enterprises flood into the Yangtze River Delta and Pearl River Delta in large Numbers, which not only drives the development of local economy, but also b