NO | TYPE | SPECIFICATION |
1 | RAW MATERIAL原材料 | TYPE | Q234 soft material |
Thickness |
|
2 | UNCOILER料架 | Operation | Double side decoiler |
Coil width | 150mm(based on your actual product) |
Max coil weight | 3000kg(1500kg each side) |
Mandrel face length | 300mm |
Inner diameter of coil | 480-530mm |
Max out diameter | 1600mm |
Material of shaft | GCR45 steel |
3 | HYDRAULIC PRE-PUNCHING(JUST FOR CASSETTE c)液压前冲孔(仅C版-KLIPS) | Thickness of coil | 1.2-1.5MM |
Hydraulic punching | 4.0kw |
4.1 | ROLL FORMER(CASSETTE DESIGN a and b)成型(A和B版型) | Work station | 26sets |
Max. roll shaft diameter | 76mm |
Power | 22kw |
Max production speed | 35mtr./min (exluding punching and cutting) |
Transducer | yaskawa |
Structure | Column |
Transmission | gear box+cardan shaft |
Roller Material | GCr15, CNC double machining,hard chrome |
cooling system | with blow airing system |
4.2 | ROLL FORMER(CASSETTE DESIGN c)成型 C版型 | Work station | 20sets |
Max. roll shaft diameter | 76mm |
Power | 22kw |
Max production speed | 10mtr./min (including punching and cutting) |
Transducer | yaskawa |
Structure | Column |
Transmission | gear box+cardan shaft |
Roller Material | GCr15, CNC double machining,hard chrome |
cooling system | with blow airing system |
5.1 | SERVO NON-STOP TRACK CUTTING SYSTEM(FOR CASSETTE a and b) 伺服跟踪不停机剪,A和B版型 |
|
|
Power | 4kw |
Cutting mould material | Cr12 MOV, quenched HRC58-62 |
5.2 | FLYING SAW CUTTING (FOR CASSETTE c)飞锯剪 | Hydraulic pressure | 20Mpa |
Power | 4.0kw |
Cutting mould material | Cr12 MOV, quenched HRC58-62 |
6 | OUTPUT TABLE 出料台 | Specification(W*H) | 3000mm*1500mm |
Stacking length | According to your demands |
|
|
|
|
1.+- 2mm tolerance |
|
|
|
2.each cassette has one set of changeable flexible coupling(可更换伸缩连轴器) |
|
|
|