ARP Finto Coppo Roof Tile Roll Forming Machine Full Automatically PLC Touch Screen Control
Product Description
Item | Parameter | |
Material | Thickness | 0.5-0.8mm |
Hydraulic powered uncoiler with coil cart | Direction | The left-sided uncoiler (loading the coil on the left side) |
Max. width of coil can be loaded | 1250 mm | |
Inner diameter of the coil | 470-530 mm | |
Motor power | 5.5kw | |
Feeding applicator | Feeding panel to the guide roller | Adjustable by right and left |
Feeding roller | Diameter is 76 mm | |
Material | 40CR steel, HRC48-52 | |
Forming stand | Station | 18stations |
Shaft Material | 45# steel 76mm diameter; | |
Frame body | H-BEAM frame 450 mm | |
Roller materail | 45# steel with chrome | |
Main motor | 11.0kw | |
Forming speed | 15-20m/min(excluding pressing and cutting) | |
Voltage | 380v,50hz,3ph(based on customer’s requirements) | |
Transport | Chains drive | |
Size approx | 18.0m*1.4m*1.5m | |
Weight | Around 12T | |
Overall packing shipment | t 2* 40ft | |
Working hours | per day 8 to 16 hours | |
Set up time | 30 min | |
Line direction | Left to right while facing operator panel | |
Cages | Use the strong steel nets sliding on the full machine length | |
Hydraulic Pressing | Material | Mold material: Cr12mov steel with quenched treated 60-62℃;Punching Power: 5.5kw |
Shearing system | Material | Blade and mold material: Cr12mov steel with quenched treated 60-62℃ |
Cutting power | 5.5kw | |
Electric and Control System | Screen | 5.7inch Siemens Touch Screen |
PLC and frequency conversion | Siemens PLC,Yasakaw Frequency Changer | |
Other electronic components | Schneider | |
Encoder | Omron | |
Use | 1)Automatic length and quantity measurement 2)Control station is used to control product length and quantity, automatically cutting to length and stop when required quantity is achieved. 3)Error is easy to adjusted. | |
Language | English and Chinese | |
Autostacker | Specification (L*W) | 6000х1500mm |
Stacking length | According to your demands | |
Product | Length | Based on requirements |
Accuracy level | Profile dimension +/- 0.5 mm Cut length: +/-1.5-2.0 mm | |